| Manufacturer |
|
Hustler Turf Equipment |
|
|
| Model Year |
|
2010 |
|
|
| Model |
|
60-inch XR-7 Kawasaki 25 hp Super Z™ |
|
|
| MSRP |
|
Request a Quote
|
|
|
| MEASUREMENTS | |
| Length |
|
77 in. (195.58 cm) |
|
|
| Height |
|
59 in. (150 cm) ROPS folded down
75 in. (191 cm) ROPS up |
|
|
| Width |
|
61 in. (154.94 cm) with discharge chute up
Tire-to-Tire: 52 in. (132.08 cm) |
|
|
| Weight |
|
1,212 lbs. (549.75 kg) |
|
|
| Turning Radius |
|
True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels |
|
|
| Mowing Width |
|
60 in. (152.4 cm) |
|
|
| Mowing Height Range |
|
1 - 5 in. (2.55 - 12.7 cm) |
|
|
| Mowing Height Adjustment |
|
Foot-operated deck height adjustment in 0.25 in. increments. Pin for setting height, detent for transport position. |
|
|
| Fuel Capacity |
|
14.4 gal. (54.5 l) |
|
|
| ENGINE | |
| Engine Make |
|
Kawasaki |
|
|
| Horsepower |
|
25 hp |
|
|
| Starter |
|
12V, solenoid shift positive engagement |
|
|
| Cooling |
|
Air with fly-wheel fan |
|
|
| Ignition |
|
Electronic |
|
|
| Air Cleaner |
|
Heavy-duty air filter |
|
|
| DRIVETRAIN | |
| Transmission/Drive |
|
Dual hydrostatic |
|
|
| Travel Speed |
|
Infinitely variable
Forward: 0 - 15 mph (0 - 22.53 km/h)
Reverse: 0 - 7.5 mph (0 - 12.07 km/h) |
|
|
| Wheels/Tires |
|
Front: 13 x 6.50 - 6, rib tread
Drive: 24 x 12 - 12, turf tread |
|
|
| Brakes |
|
Service: Hydrostatic dynamic braking
Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged. |
|
|
| BODY | |
| Frame |
|
1.5 x 3 x 0.187 in. (3.8 x 7.62 x 0.47 cm) rectangular steel tubing with internal gusset in frame bend |
|
|
| Seat |
|
Molded-vinyl with armrests |
|
|
| Seat Adjustment |
|
Fore and aft |
|
|
| Rollover Protection (ROPS) |
|
Foldable |
|
|
| OPERATIONAL | |
| Instrumentation |
|
Hour meter, engine warning lights |
|
|
| Steering |
|
SmoothTrak™ twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls. |
|
|
| Safety Features |
|
Operator presence system connected to deck and drive clutches, stabilizer rollers at rear of tractor |
|
|
| OTHER | |
| Deck Construction |
|
7 ga. deck plate with an 11 ga. deck plate doubler with 7 ga. triplers at each spindle mount |
|
|
| Spindles |
|
Machine ductile housing, 1 in. (2.5 cm) diameter high carbon steel shafts and sealed ball bearings |
|
|
| Blades |
|
Heavy-duty, heat-treated, high-lift steel blades, 20.50 x 2.50 x 0.203 in. flat blade, high sail |
|
|
| Blade Tip Speed |
|
18,400 fpm |
|
|
| Discharge |
|
Side, molded rubber chute |
|
|
| Deck Lift |
|
Raise and lower deck from driver's seat with simple foot-operated deck height adjustment. Pin for setting height and transport position. Change cutting heights, climb curbs and trailer more easily. |
|
|
Specs, Quotes, Overview